EN 
Specifications of DFX5020 Wide Mouthed ZM DC Blower Fan
| Listed Model | Rated Voltage | Operating Voltage | Rated Current | Rated Speed | Air Flow | Static pressure | Noise Level | Available Features (Optional) | Weight | |||
| （VDC） | （VDC） | （A） | （RPM） | （CFM） | (mmH2O) | (dBA) | Tachometer Output | Rotation Detector | Thermal Control | Pulse Width Modulation | g | |
| DFX502005H | 5 | 3.5~5.75 | 0.30 | 4,500 | 6.20 | 11.40 | 32.00 | ◆ | ◆ | ◆ | ◆ | 30 |
| DFX502005M | 3.5~5.75 | 0.20 | 3,500 | 4.80 | 6.90 | 25.50 | ◆ | ◆ | ◆ | ◆ | ||
| DFX502005L | 3.5~5.75 | 0.15 | 2,500 | 3.40 | 3.50 | 16.70 | ◆ | ◆ | ◆ | ◆ | ||
| DFX502012H | 12 | 6.0~13.8 | 0.20 | 4,500 | 6.20 | 11.40 | 32.00 | ◆ | ◆ | ◆ | ◆ | |
| DFX502012M | 6.0~13.8 | 0.15 | 3,500 | 4.80 | 6.90 | 25.50 | ◆ | ◆ | ◆ | ◆ | ||
| DFX502012L | 6.0~13.8 | 0.10 | 2,500 | 3.40 | 3.50 | 16.70 | ◆ | ◆ | ◆ | ◆ | ||
| DFX502024H | 24 | 12.0~27.6 | 0.15 | 4,500 | 6.20 | 11.40 | 32.00 | ◆ | ◆ | ◆ | ◆ | |
| DFX502024M | 12.0~27.6 | 0.10 | 3,500 | 4.80 | 6.90 | 25.50 | ◆ | ◆ | ◆ | ◆ | ||
| DFX502024L | 12.0~27.6 | 0.06 | 2,500 | 3.40 | 3.50 | 16.70 | ◆ | ◆ | ◆ | ◆ | ||
| X=S: Sleeve Bearing or B: Ball Bearing or H: Hydro Bearing; Specifications are subject to change without notice | ||||||||||||
Description of DFX5020 Wide Mouthed ZM DC Blower Fan
Frame: PBT OF UL 94V-0
Impeller: PBT OF UL 94V-0
Bearing Type: Sleeve Bearing & Ball Bearing& Hydro Bearing
Lead Wires: UL Type or Equivalent ( + ) : Red ( - ) : Black
Motor Protection: Reverse Polarity Protected; Automatic Restart
Operating Temperature and Humidity: -10℃～70℃, 5%～90%RH
Storage Temperature and Humidity: -40℃～80℃, 5%～95%RH
Fan Performance Curve
Dimensions (Unit: mm)
Xie Heng Da axial cooling fan factory provide 50mm blower fan, effective cooling and optimized airflow solutions.
5020 Blower Fan 24v Application To 3d Printer
Cooling the hot end: The hot end is the part of the printer that melts the plastic filament. It can get very hot, so it is important to cool it down to prevent heat creep. A 5020 blower fan 24v can be used to blow air over the hot end to help it cool down.
Pushing filament through the nozzle: The 5020 blower fan 24v can be used to push filament through the nozzle of the printer. This can be helpful if the filament is not feeding properly.
Cooling the print bed: The print bed is the surface on which the 3D print is made. It can get hot, so it is important to cool it down to prevent warping. A 5020 blower fan 24v can be used to blow air over the print bed to help it cool down.
Removing smoke and fumes: When the printer is printing, it can produce smoke and fumes. A 5020 blower fan 24v can be used to remove these fumes from the printing area.
+
+
+
